Foam/Soap Sticks (Water & Condensate)
| Print |

Stick Name & Description

Part #

Size

Click to Download

ALBERTA FOAM STICK™

ALBERTA FOAM STICKS™ are Special foam sticks that contain HIGHLY active surfactants, friction reducer and foam stabilizer in water-soluble tubes. When this foamer is released it acts very quickly to lift water from the well.

ACL-4450 




1 1/4 X  15








(Log in Required for SDS)
Not Regulated

BIG DIPPER SOAP™ STICK

BIG DIPPER SOAP STICKS™ are a water-soluble sticks containing a high foaming surfactant formulated to dissolve quickly with little or no agitation. Excellent results in bring a well up to production levels quickly. Works well in wells that the operator has to blow down

ACL-4350




1 1/4 X 15








(Log in Required for SDS)
Not Regulated

CANADIAN BLOWOUT STICK

CANADIAN BLOWOUT STICKS are excellent sticks for wells with low bottom hole pressures. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick works with well's that contain up to 45% condensate.Wells that contain greater than 45%-65% Can use Superfoam or Profoam sticks and over 65% should use the OIL (CONDENSATE) FOAM STICKS, CONDI FOAM STICKS or the SLICK WILLIE FOAM STICK.

ACL-4120

ACL-4150

ACL-4190

ACL-4195

5/8 X 15

1 1/4 X 15

1.8 X 18

2.1 X 18





(Log in Required for SDS)
Not Regulated

CONDI (CONDENSATE) FOAM STICK™

(CONDENSATE) CONDI FOAM STICKS are primarily used to increase production by removing condensate and water from gas-condensate wells. The foaming action decreases the hydrostatic back-pressure which increases gas production which further enhances the foaming action until the well unloads. Water must be present to enhance the foaming action in wells with BHT less than 130 degrees Fahrenheit. Designed for wells where the column has over 75% or higher condensate.

ACL-8220

ACL-8235

ACL-8250

ACL-8275

ACL-8280

3/4 X 15

1 X 15

1 1/4 X 15

1 3/8 X 16

1 5/8 X 18





(Log in Required for SDS)
Not Regulated

COR-FOAM STICK

COR-FOAM (FOAMER/CORROSION} STICKS are a unique chemical stick that contains 100% active ingredients that protect wells from corrosion and produce high amounts of foam. This product is contained in a water soluble tube with soluble caps.

ACL-5540

1 1/4 X 9




(Log in Required for SDS)
Not Regulated

FISHER KING SC-21 STICK

FISHER KING (SC-21) STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick also works well in wells with high brine or condensate levels to 45%. Wells that contain greater than 45%-65% Can use Superfoam or Profoam sticks and over 65% should use the OIL (CONDENSATE) FOAM STICKS, CONDI FOAM STICKS or the SLICK WILLIE FOAM STICK.

ACL-4010

ACL-4020

ACL-4035

ACL-4050

ACL-4075

ACL-4080

5/8 X 15

3/4 X 15

1 X 15

1 1/4 X 15

1 3/8 X 16

1 5/8 X 18




(Log in Required for SDS)
Not Regulated

GAS CONDENSATE FOAM STICK™

GAS CONDENSATE FOAM STICKS are primarily used to increase production by removing condensate and water from gas-condensate wells. The foaming action decreases the hydrostatic back-pressure which increases gas production which further enhances the foaming action until the well unloads. Water must be present to enhance the foaming action in wells with BHT less than 130 degrees Fahrenheit. Designed for wells where the column has over 65% condensate. For wells that require a stronger condensate stick please use the CONDI FOAM STICK.

ACL-8350

1 1/4 X 15




(Log in Required for SDS)
Not Regulated

HYDRA FOAM STICK

HYDRA FOAM STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick also works well in wells with hydrocarbon content that may inhibit foam production by other sticks.

ACL-7620

ACL-7635

ACL-7650

ACL-7680

3/4 X 15

1 X 15

1 1/4 X 15

1 5/8 X 18




(Log in Required for SDS)
Not Regulated

KWIK-N-DRY STICK


KWIK-N-DRY SOAP STICKS are water-soluble sticks containing a high foaming surfactant formulated to dissolve quickly with little or no agitation. Excellent results in bring a well up to production levels quickly. Works well in wells that the operator has to blow down.

ACL-3030

ACL-3035

ACL-3050

ACL-3070

1 X 10 1/2

1 X 15

1 1/4 X 15

1 3/8 X 5 1/2




(Log in Required for SDS)
Not Regulated

PROFOAM STICK

PROFOAM STICKS™ are Special foam sticks that contain 100% active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Works excellently in wells that contain condensate up to 65%. Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS,CONDI FOAM STICKS or SLICK WILLIE FOAM STICKS

ACL-5150

1 1/4 X 15




(Log in Required for MSDS)
Not Regulated

LIFTOUT FOAM STICKS

LIFTOUT FOAM STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick works with well's that contain up to 45% condensate.Wells that contain greater than 45%-65% Can use Superfoam or Profoam sticks and over 65% should use the OIL (CONDENSATE) FOAM STICKS, CONDI FOAM STICKS or the SLICK WILLIE FOAM STICK.

ACL-4720

ACL-4735

ACL-4750

ACL-4780

3/4 X 15

1 X 15

1 1/4 X 15

1 5/8 X 18




(Log in Required for SDS)
Not Regulated

LIQUID FOAM STICK

LIQUID FOAM STICKS are a highly active, very concentrated liquid foaming agent, contained in a water soluble tube. Used as an aid for unloading produced water in gas wells contaminated with brine, hydrocarbons and/or dissolved solids. This stick also works well in wells with high brine or condensate levels to 65% wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS OR CONDI FOAM STICKS.

ACL-2540

ACL-2545

ACL-2550

ACL-2560

 

1 1/4 X 9

1 1/4 X 12

1 1/4 X 15

1 1/4 X 18

 




(Log in Required for SDS)
Not Regulated

MAX FOAM STICK

MAX FOAM STICKS™ are Special foam sticks that contain one of the highly active surfactants that can be put in stick form ,active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Works excellently in wells that contain condensate up to 65%.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICKS.

ACL-5250

1 1/4 X 15




(Log in Required for SDS)
Not Regulated

NORTHERN STAR STICK

NORTHERN STAR STICKS are especially effective in wells which contain both water and condensate up to 35%. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This stick works with well's that contain up to 45% condensate.Wells that contain greater than 45%-65% Can use Superfoam or Profoam sticks and over 65% should use the OIL (CONDENSATE) FOAM STICKS, CONDI FOAM STICKS or the SLICK WILLIE FOAM STICK.

ACL-4550

1 1/4 X 15




(Log in Required for MSDS)
Not Regulated

OIL (CONDENSATE) FOAM STICK™

(CONDENSATE) OIL FOAM STICKS are primarily used to increase production by removing condensate and water from gas-condensate wells. The foaming action decreases the hydrostatic back-pressure which increases gas production which further enhances the foaming action until the well unloads. Water must be present to enhance the foaming action in wells with BHT less than 130 degrees Fahrenheit. Designed for wells where the column has over 65% condensate. For wells that require a stronger condensate stick please use the CONDI FOAM STICK.

ACL-8010

ACL-8035

ACL-8050

ACL-8075

ACL-8080

ACL-8090

ACL-8095

5/8 X 15

1 X 15

1 1/4 X 15

1 3/8 X 16

1 5/8 X 18

1.8 X 18

2.1 X 18




(Log in Required for MSDS)
Not Regulated

SAND FOAM STICK

SAND FOAM STICKS ( “SAND, SLUDGE & SILT” dispersant c/w foamer) are designed to convert dense sludge and silt deposits into light non adherent agglomerates that permit easy dispersion. Foaming agents aid in the unloading of natural gas wells where water buildup reduces production.

ACL-3520

ACL-3550

3/4 X 15

1 1/4 X 15




(Log in Required for MSDS)
Not Regulated

SLICK STICK

SLICK STICKS are water-soluble sticks containing a combination of surfactants and friction reducer. This stick can be used in wells which contain levels of condensate to 65%; Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS or the CONDI FOAM STICKS.

ACL-7510

ACL-7535

ACL-7550

ACL-7575

ACL-7580

5/8 X 15

1 X 15

1 1/4 X 15

1 3/8 X 16

1 5/8 X 18




(Log in Required for SDS)
Not Regulated

SLICK WILLIE OIL FOAM STICKS

SLICK WILLIE OIL FOAM STICKS are especially effective in a water, condensate and hydrocarbon environment. Special sticks that contain 100% active surfactants, friction reducer and foam stabilizer in water-soluble tubes. Natural gas bubbling through the water column and 100% active ingredients produces foam which can help remove water from watered-up gas wells.

ACL-8120

ACL-8140

ACL-8150

3/4 x 15

1 1/4 x 9

1 1/4 x 18




(Log in Required for SDS)
Not Regulated

SLOWPOKE FOAM STICK

SLOWPOKE FOAM STICKS are primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads. This slower dissolving stick works with well's that contain up to 45% condensate.Wells that contain greater than 45%-65% Can use Superfoam or Profoam sticks and over 65% should use the OIL (CONDENSATE) FOAM STICKS, CONDI FOAM STICKS or the SLICK WILLIE FOAM STICK.


ACL-4620

ACL-4635

ACL-4650

ACL-4680


3/4 X 15

1 X 15

1 1/4 X 15

1 5/8 X 18




(Log in Required for SDS)
Not Regulated

SOUTHERN STAR STICK

SOUTHERN STAR STICKS are especially effective in wells which contain both water and condensate up to 65%. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.This stick works with well's that contain up to 45% condensate.Wells that contain greater than 45%-65% Can use Superfoam or Profoam sticks and over 65% should use the OIL (CONDENSATE) FOAM STICKS, CONDI FOAM STICKS or the SLICK WILLIE FOAM STICK.

ACL-4810

ACL-4820

ACL-4835

ACL-4850

ACL-4875

ACL-4880

5/8 X 15

3/4 X 15

1 X 15

1 1/4 X 15

1 3/8 X 16

1 5/8 X 18




(Log in Required for MSDS)
Not Regulated

SUPER FOAM STICK

SUPER FOAM STICKS are a stick that contains 100% active foamer in a water soluble tube that can produce up to four (4) times more foam than some other sticks on the market. This stick can develop stable foam in high temperature deep gas wells. This stick works well with well's that contain up to 65% condensate.Wells that contain greater than 65% should use the OIL (CONDENSATE) FOAM STICKS or CONDI FOAM STICKS.

ACL-5020

ACL-5040

ACL-5050

ACL-5065

ACL-5070

3/4 X 15

1 1/4 X 9

1 1/4 X 15

1 1/4 X 18

1 3/8 X 5





(Log in Required for SDS)
Not Regulated

ULTRA FOAM STICK

ULTRA FOAM SELF AGITATING STICKS are sticks that requires no agitation as it has a self agitating agent built in. This stick is also very effective in high brine environments. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.

ACL-3110

ACL-3150

3/4 X 15

1 1/4 X 15




(Log in Required for SDS)
Not Regulated

WESTERN STAR STICK

WESTERN STAR SOAP STICKS are especially effective in wells which contain both water and condensate up to 45%. Primarily used to remove water from gas wells and increase gas production. The foaming action decreases the hydrostatic back-pressure which increases gas production that further enhances the foaming action until the well unloads.This stick works with well's that contain up to 45% condensate.Wells that contain greater than 45%-65% Can use Superfoam or Profoam sticks and over 65% should use the OIL (CONDENSATE) FOAM STICKS, CONDI FOAM STICKS or the SLICK WILLIE FOAM STICK.

ACL-4210

ACL-4210

ACL-4235

ACL-4250

ACL-4275

ACL-4280

5/8 X 15

3/4 X 15

1 X 15

1 1/4 X 15

1 3/8 X 16

1 5/8 X 18




(Log in Required for SDS)
Not Regulated
Foam(Soap) Sticks (Water/Condensate) Self Agitating Foam Stick & Gas Sticks
Sand/Silt/Sludge Stick Disp./Foamer
Condensate Sticks Paraffin Inhibitor Stick Asphaltene Dispersant Stick
Acid & Acid Cap Sticks
Paraffin Inhibitor Pellets
Corrosion Inhibitor Sticks
Acid Pellets H2S & Oxygen Scavenger Sticks
Corrosion Inhibitor Pellets
Scale Inhibitor Stick Sticks for Drilling Operations
Salt Inhibitor Sticks
Scale Inhibitor Pellets
Bug(SRB) Treating Sticks Water Soluble Tubes